Kako obrisati particije ( koje su nedostupne iz DISK MENAGMENT-a)

Perica_barii

HWG OC Team
Joined
June 2, 2009
Messages
627
Location
Bar, Beograd
1 Open either an elevated command prompt or a command prompt at boot for what you want to use.


You will not be able to run the clean or clean all command on the disk that Windows is installed on unless you do so in a command prompt at boot.


2 Type the diskpart command into the command prompt, and press Enter. (see screenshots below step 5)

3 Type the list disk command into the command prompt, and press Enter.

4 Type the command below into the command prompt, and press Enter.

select disk #

Substitute # in the command above with the actual disk number (ex: "3") of the disk you want to clean.

For example: select disk 3

5 Type the clean or clean all command you want to use into the command prompt, and press Enter.


The clean command will finish quickly since it only marks the data on the disk as deleted.

The clean all command will take about an hour per 320 GB to finish running since it performs a secure erase.

Erase Disk using Diskpart Clean Command in Windows 10-diskpart_clean_command.png
Erase Disk using Diskpart Clean Command in Windows 10-diskpart_clean-all_command.png
 
Top